Comtech EF Data SNM-1002 - Manual (Page 168)

SNM-1002 LinkSync
 Modem
Revision 2
Remote Control Operation MN/SNM1002.OM
A–42
State Of
Product Command:
Response:
>add/SOP_'cr'
add'cr'
abc'cr'
rrrrr bps'cr'
'cr'
'cr''lf']
Product address
Data format
Baud rate
Comm type
Where: abc = Explained below.
a = Number of data bits ( 7 )
b = Parity type (O, E, N)
c = Number of stop bits (2)
rrrrr = baud rate ("150", "300", "600", "1200", "2400",
"4800", "9600", "14.4K", "19.2K").
= Variable length strings explaining
communication hardware type "RS-485, 2 wire", "RS-
485, 4 wire", "RS-232".
= Variable length strings explaining the
intention of the product. "Under normal system
operation", "REFLASH of BULK firmware required",
"REFLASH of M&C firmware required".