BECKHOFF EP9214-0023 - Manual (Page 96)

Comissioning and Configuration
4.6.2.3.2 Index 6010 DPO Inputs Ch.2
Index Name Meaning Data type Flags Default
6010:0 DPO Inputs Ch.2 Input of the first channel UINT8 RO 0x18 (24
dec
)
6010:01 Error Us The current monitoring of Us
has tripped. The bit must be re-
set by a Global Reset (F707:04)
or by the corresponding Reset
Us (7010:05). The output can-
not be activated as long as the
bit is set. boolean RO 0x00 (0
dec
)
6010:02 Error Up The current monitoring of Up
has tripped. The bit must be re-
set by a Global Reset (F707:04)
or by the corresponding Reset
Us (7010:06). The output can-
not be activated as long as the
bit is set. boolean RO 0x00 (0
dec
)
6010:03 Warning Us The monitoring has detected
overcurrent; the switching off of
output Us on this channel is im-
minent if the current consump-
tion of the branch does not de-
crease. boolean RO 0x00 (0
dec
)
6010:04 Warning Up The monitoring has detected
overcurrent; the switching off of
output Us on this channel is im-
minent if the current consump-
tion of the branch does not de-
crease. boolean RO 0x00 (0
dec
)
6010:05 Status Us 0
bin
: The output is switched off
1
bin
: The output supplies 24 V
boolean RO 0x00 (0
dec
)
6010:06 Status Up 0
bin
: The output is switched off
1
bin
: The output supplies 24 V
boolean RO 0x00 (0
dec
)
6010:07 Channel Error 6010:01 or 6010:02 are set boolean RO 0x00 (0
dec
)
6010:08 Error Sum Current Sum current oft he channel has
been exceeded. So the output
is switched off. An active reset
is required to set the output
again. boolean RO 0x00 (0
dec
)
6010:09 Warning Sum Current An overcurrent peak has beenn
detected. If the output will be
loaded furtermore in this way it
will switch of. boolean RO 0x00 (0
dec
)
6010:0F TxPDO State boolean RO 0x00 (0
dec
)
6010:10 TxPDO Toggle boolean RO 0x00 (0
dec
)
6010:11 Current Us Current from Us INT16 RO 0x0000 (0
dec
)
6010:12 Current Up Current from Up INT16 RO 0x0000 (0
dec
)
6010:13 Peak Value 1 Peak value of the 1. item, that
was measured for extended di-
agnosis of channel 2. INT16 RO 0x0000 (0
dec
)
6010:14 Peak Value 2 Peak value of the 2. item, that
was measured for extended di-
agnosis of channel 2. INT16 RO 0x0000 (0
dec
)
6010:17 Timestamp 1 Time stamp when the peak
value 6010:13 was measured UINT64 RO
6010:18 Timestamp 2 Time stamp when the peak
value 6010:14 was measured UINT64 RO
EP9214-0023 and EP9224-0023 96 Version 2.0.0