ATEIS UAPg2 - Manual (Page 94)

UAPG2 MANUAL
Version EN.24
94
Search and set PPM
1) First make sure to clear all old remote IP address.
2) Click “View Remote list” or hit
2) A window appears, click on PPM’s page, not on URC’s one.
3) Click ...
4) A new dialogue window appears, Click again...
5) When the system has finished the search, a list with the various connected PPM appears. Each
PPM is identified by its own serial number. This number is written on a sticker at the back of the
PPM. The system finds automatically each PPM (In our example the PPM’s serial number is: R00126).
Note: If the system doesn't find all the remote devices: clear all remote IP address (Shift+F5) and
search again.