ATEIS UAPg2 - Manual (Page 198)

UAPG2 MANUAL
Version EN.24
198
You can see on the vu-meter that when the speaker talks at 8 dBu, the final level is around -10.6 dBu:
Input level:
AGC
level: RMS vu-meter:
AGC in AGC out
Inverter
The control window of the "Inverter" module is opened by a double click on the icon in the 'UAPG2'
design window and appears like this:
Invert Parameters
Parameter Range Comment
Mute Button Mute the Inverter's module
Invert. Button activate the inverter
Filter
The filters allow to attenuate or to select a specific frequency or band of frequency.
The Crossover splits the signal in sub-signal with 2, 3 or 4 Way. Each way contains a specific
frequency band. For example:
Low, Bass medium, High medium and High (4 ways).
Useful for active loudspeaker system.