ATEIS UAPg2 - Manual (Page 22)

UAPG2 MANUAL
Version EN.24
22
SYSTEM REQUIREMENTS
• IBM compatible computer with Pentium III MMX CPU, 400 MHz or faster
• 256 MB RAM
• Hard drive with at least 20 MB of free space
• CD-ROM or DVD drive or a connection to the www (for installation only)
• VGA display (1024 x 768, 256 color or better recommended)
• One free USB-port
• Operating system: Windows 2000® Professional (Service Pack 3 or greater), Windows
XP® Home or Professional (Service Pack 2 or greater)
NOTE: If you use Windows VISTA® be sure to be in compatibility mode.
SOFTWARE INSTALLATION
Don't plug in your UAPG2 yet! Install and launch the software first!
Before installing the UAPG2 software check if your PC meets the system requirements.
Turn on your PC and allow Windows to start up
Insert the supplied CD-ROM into your drive. If the content of the CD-ROM is not displayed
automatically double click the 'My Computer' icon and navigate to the 'DVD/CD' drive.
Note: If you have access to the WEB: goes to
www.ateis-international.com and download the latest
software version. You may need to update firmware see
FIRMWARE UPDATE
chapter.
Copy the file 'ATEIS UAPG2 v.1.x.x setup' using the copy and paste commands or by drag and
drop to the 'Desktop'. Wait until the task has finished.
Start the program 'ATEIS UAPG2 v.1.x.x setup' by double click on its icon and follow the
instructions to install the UAPG2 software onto your hard drive.
Click .