ATEIS UAPg2 User Manual
Page 50
UAPG2 MANUAL
Version EN.24
50
RS-232 SET: Set the RS232 communication, Baud rate, parity, Stop bit and connected target
Click [read] to see which settings are into each UAPG2 of the system
Click [SET] to load some settings changes
NTP: Set the UAPg2 to have the date/time updated in real-time by the NTP servers. NTP means
Network Time Protocol.
Click [read] to see which settings are into each UAPG2 of the system
Click [SET] to load some settings changes
See
"Adjust Time/Date with NTP"
chapter.
This manual is related to the following products: