ATEIS UAPg2 - Manual (Page 83)

UAPG2 MANUAL
Version EN.24
83
Use the Virtual window (Create Virtual control)
The Virtual Control allows you to define group buttons, LEDs, or Fader. You can import those groups
in the Monitor Window.
Open Virtual Window: menu:
> View > Virtual control (or F11)
1) Select by drag and drop (from the Design Control Area to the Virtual control window) which kind
of controls or indicators (Logical In, Logical Out or Knob) you want.
2) Name the virtual adjustment by right-clicking on it:
> Properties > “Function field”. You can also
adjust some settings, in the properties window.
3) Assign which adjustments you want to control with this virtual adjustment (double click on the
component icon then right-click on the adjustment and select Virtual control > analogue in, logic
in or logic out (depends on which kind of adjustment you want to control) > name of the virtual
adjustment .
4) If you want to use the virtual adjustment in the Monitor window right click on the virtual
adjustment and select >
copy to Monitor then paste it on the monitor window.