ATEIS UAPg2 - Manual (Page 186)

UAPG2 MANUAL
Version EN.24
186
The small squares act as handles that can be dragged to the desired position and show the following
parameters:
o red Ratio x:1
o blue Threshold (dB)
o yellow Threshold range (dB)
Compressor Parameters
Parameter Range Comment
Graph... Button Opens the graphical display/editor window.
Ratio x:1 0.10 to 1.00 Sets compression ratio.
Threshold (dB) -60.0 to
+20.0 dB
Sets the threshold level above which compression begins.
Threshold range (dB) 0.0 to 40.0 dB Sets the range of level, in which the ratio gradually alters from 1:1
to the value set by the ratio parameter (soft knee function).
Attack time (ms)
(Attack)
10 to 1000 ms Sets the time it takes to respond to the input signal.
Release time (ms)
(Release)
10 to 1000 ms Sets the time it takes to release gain reduction.
Gain reduction (dB) 0.0 to
-25.0 dB
Reflects the current amount of gain reduction.
Bypass On/Off Bypasses the compressor's function.
Soft knee On/Off Enables/disables the “Soft Knee” mode.
Compress LED, lit green Indicates compression.