ATEIS UAPg2 User Manual
Page 206
UAPG2 MANUAL
Version EN.24
206
DigiLink input and Digilink output
Create a virtual audio channel to send Audio through the Link protocol.
16 audio channels at 48 kHz are available from each UAP device to the next
linked UAP, and 5 audio channel at 96 kHz.
Send audio to the next UAP Receive audio from the previous UAP
Caution : The digilink component send the audio only to the next UAPg2 in the system (the first is
connected to the PC), as in the following draw.
This manual is related to the following products: