ATEIS UAPg2 - Manual (Page 71)

UAPG2 MANUAL
Version EN.24
71
To scan the network and detect UAPG2 click on [search] button
If you have this message box
Verify the steps 1) and 2) .
And close UAPG2 software and re-open it
Open Ethernet connection
Select the UAPG2 you want to connect to (it makes sense
when you have several UAPG2) and click [connect] button.
Once the connection process complete (successful) the computer is ready to communicate with
the UAPG2. To know if the Ethernet link is activated a green Ethernet led appears in the bottom left
of the UAPG2 software.