ATEIS UAPg2 - Manual (Page 220)

UAPG2 MANUAL
Version EN.24
220
Parameter Range Comment
Ambiant noise Meter
AGC Level Meter Display the current compensation gain
Hold time 1 to 5 sec Holding time between when the P.M. signal passes below the mode
threshold and the end of the paging activity.
Paging activity Light up when the paging is active.
(when P.M. is above the mode threshold)
Decrease Zone Indicates that the AGC gain is decreasing
Dead Zone Indicates that the AGC is not changing
Increase Zone Indicates that the AGC gain is increasing
Fast Increase Zone Indicates that the AGC gain is increasing fast
Sensing Mic Level Indicator
/RMS
Show the input level of the sensing microphone
C/Sensing Mic Level Indicator Show the input level of the sensing microphone through the
calibration transfer function
Output Level Indicator
/RMS
Show the output level
Differential Level Indicator Difference between the Output level and C/Sensing Mic level.
For the procedures and use, please see
Use the Automatic Gain Control .