ATEIS UAPg2 User Manual
Page 175
UAPG2 MANUAL
Version EN.24
175
Analog Input Adjustments
Parameter
Range
Comment
Bypass
On/Off
Bypasses the channel fader settings. The channel gain will be equal
to unity gain (0 dB); LED, lit green when activate.
Mute
On/Off
Mutes or un-mutes the input channel; LED, lit red with channel
muted.
Sensitivity
0dB, 12dB, 24dB,
40dB, 54dB
Sets the input gain of the channel preamp.
Phantom Power
On/Off
Applies 48 VDC phantom power to the channel input for use with
condenser mikes.
RTO
LED, Lit blue
Indicates an input channel 'Routed To Output(s)'.
Clip
LED, lit red
Indicates channel level above 'Clip Threshold (dB)'.
Volume (dB)
-20 to +20 dB
Meter showing the channel RMS level.
Signal
LED, lit yellow
Indicates audio signal presence above -30 dB from chosen
'Sensitivity'.
Level (dB)
-90.0 to +20.0 dB Signal output level of the module
Clip Threshold
-20.0 to +20.0 dB Sets the threshold of the Clip indicator.