ATEIS UAPg2 User Manual
Page 179
UAPG2 MANUAL
Version EN.24
179
Standard Mixer
Route several signals to Output(s)
The matrix components are organized in a subfolder named 'Matrix' holding the modules '4x4', '8x8'
and '16x16':
Since the only difference of these modules is their number of in- and outputs, let's take a detailed
look just to the smallest one, the 4x4. The control window of the 'Matrix' module is opened by a
double click on the icon in the 'UAPG2' design window and appears like this:
The matrix module is similar to the standard mixer, with the main difference, that there is no ability
to make independent mixes for each output channel. So the module primary is used for simple
routing purposes.
By default routing is set 1 to 1; audio at each input channel only appears on the particular output
channel with unity gain. In short: The module does nothing at all.
Matrix Parameters
Parameter
Range
Comment
Input Mute
On/Off
Mutes or un-mutes the input channel.
Input Level (dB)
-90.0 to
+20.0 dB
Sets the input level of the channel.
Routing Buttons
On/Off
Turns on/off the input on the particular output channel.
Output Level (dB)
-90.0 to
+20.0 dB
Sets the master output level of the channel.
Output Mute
On/Off
Mute or un-mutes the output channel.