ATEIS UAPg2 - Manual (Page 110)

UAPG2 MANUAL
Version EN.24
110
Define Messages
Open your web browser, and type the IP address of the PPMTouch.
To configure the paging, click on [PAGING].
Don't forget to click on to store these settings.
Define Control
Control a fader
In the UAPg2 software, open the component to control.
To control a fader, right-click on the fader and select "Third Party".
Open View/Third Party, and select the "Elements" tab. You can see the element control.
At the moment, you cannot choose the increasing/decreasing step. It is fixed to 2,2 dB.
Just add a "I" to the command ID (here C001) to increase or a "D" to decrease.
In this example, the command IC001, will increase of 2,2 dB.
The command DC001 will decrease of 2,2 dB.
Not available on v1.0.3.54:
Click on the three dots ( ) of the event, that will open this window.