ATEIS UAPg2 - Manual (Page 151)

UAPG2 MANUAL
Version EN.24
151
Use the Message player component
The audio file must be a wave mono file, 16 bits and with a bit rate of 16, 24 or 48kHz.
Otherwise it won’t appear in the library.
Caution: The message player cannot be used with the UAPg2 set at 96kHz. The UAPg2 must be set at
48kHz.
Drag and drop the "Message player" component to the design area. And link its output to the
destination output.
Double click on the Message storage component. It contains two tabs:
•
-UAP Music Management
•
-Event Settings