ATEIS UAPg2 - Manual (Page 178)

UAPG2 MANUAL
Version EN.24
178
Clicking the orange coloured function [Output( n )] buttons under the label 'Variable Matrix' in the
middle of the window opens the sub control windows of the particular output channels.
In here you can create an individual mix of the input signals independently for the specified output.
By default all levels are set to 0 db, which basically means, that all audio signals at the input are
mixed with no attenuation and appear like this on every output.
Standard Mixer (Master) Parameters
Parameter Range Comment
Input Mute On/Off Mutes or un-mutes the input channels.
Input Level (dB) -90.0 to
+20.0 dB
Sets the input level of the channel
Variable Matrix Button Opens the sub control window 'Standard Mixer for routing and
mixing input channels to the specified output
Output Level (dB) -90.0 to
+20.0 dB
Sets the master output level of the channel
Output Mute On/Off Mutes or un-mutes the output channel.
Standard Mixer Parameters
Parameter Range Comment
Level (dB) -90.0 to
+20.0 dB
Sets the input levels mixed to the particular output