Dataman 40Pro - Manual (Page 91)

PG4UW
91
Device / Select from default devices
This window allows selecting the desired type of the device from list of default devices. This
one is a cyclic buffer in which are stored recently selected devices including their device
options. This list is saved to disk by command File / Exit and save.
If you wish display additional information about the current device, use an key.
This command provides a size of device, organization, programming algorithm and a list of
programmers (including auxiliary modules) that supported this device. You can find here
package information and other general information about current device too.
Use a key for delete of current device from list of default devices. There isn’t possible
to empty this list, if you repeat this access. The last device stays in buffer and the key
isn't accepted.
Device / Select device...
This window allows selecting the desired type of the device from all devices supported by
current programmer. It is possible to choose device by name, by type or by manufacturer.
Note 1: The names of the programmable devices in software don't contain all characters,
shown at the top of the chip or mentioned in the datasheet section part numbering. The
names contain all characters necessary to identification of the device, but don't contain such
codes, that have none influence to the programming, for example temperature code, speed
code, packing type code, etc.. If such code letter is at the end of the name, is omitted, if such
code letter is in the middle of name, then is replaced by character 'x'.
Examples:
Devices Am27C512-150, Am27C512-200 and Am27C512-250 are shown in the software
only once, as Am27C512
S29GL064N11TF1010 device is shown in the software as S29GL064NxxTxx01
Note 2: If some device is listed twice and the second time with suffix x16, it means, that
programming algorithm provides faster word mode.
Selected device is automatically saved to buffer of default devices. This buffer is accessible
with Device / Select from default devices command.
In the Search mask field you can enter mask for filtering of whole device list by device name,
manufacturer and/or programming adapter names. The space as delimiter of filter items
(fragments) has "OR" function. If you want to enter exact filter string including spaces, use
quotation mark character ".
Example:
We need to see the devices that need no adapter, and we know that such devices have
following note string in Adapter column of device list: Note: in ZIF socket of programmer. The
suitable filter to show only wished devices is "in ZIF" (including quotation marks). The filter
strings are not case sensitive, i.e. for example "ZIF" is the same as "zif".
If you wish display additional information about the current device, use button Device info or
an key. This command provides a size of device, organization, programming
algorithm and a list of programmers (including auxiliary modules) that supported this device.