Dataman 40Pro - Manual (Page 52)

52
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx,
dsPIC series
Microcontrollers Philips: LPC series
Microcontrollers Silicon Laboratories(Cygnal): C8051 series
Notes:
(*1) - suitable adapters are available for non-DIL packages
(*2) - there exist only few adapters for devices with more than 40 pins. Therefore think
please about more powerful programmer (DATAMAN-48PRO2 / DATAMAN-48PRO2C), if
you need to program devices with more than 40 pins
For a full list of supported devices, please visit our website www.dataman.com .
I.C. Tester
Static RAM: 6116..624000
Programming speed
Device Operation Mode Time
27C010 programming and verify in ZIF 28 sec
AT29C040A programming and verify in ZIF 32 sec
AM29F040 programming and verify in ZIF 62 sec
PIC16C67 programming and verify in ZIF 10 sec
PIC18F452 programming and verify in ZIF 7 sec
AT89C52 programming and verify in ZIF 16 sec
PIC16F876A programming and verify ISP 5 sec
PIC12C508 programming and verify ISP 3 sec
Conditions: P4, 2,4GHz, USB 2.0 HS, Windows XP, PG4UW 2.11
SOFTWARE
Algorithms: only manufacturer approved or certified algorithms are used. Custom
algorithms are available at additional cost.
Algorithm updates: software updates are available approx. every 4 weeks, free of charge.
Main features: revision history, session logging, on-line help, device and algorithm
information
Device operations
standard:
intelligent device selection by device type, manufacturer or typed fragment of part name
blank check, read, verify
program
erase
configuration and security bit program
illegal bit test
checksum
security
insertion test
contact check
ID byte check
special
auto device serial number increment