Dataman 40Pro - Manual (Page 13)

Quick Start
13
Installing programmer hardware
connect the USB (or LPT) port of programmer to a USB (or printer) port of PC using
supplied cable
connect the connector of the power supply adapter to the programmer or turn on
programmer by switch
Installing the programmer software
Run the installation program from the CD (Setup.exe) and follow the on-screen instructions.
For the latest information about the programmer hardware and software release, please visit
our website
www.dataman.com .
Run the control program
Double click on
After start, control program PG4UW automatically scans all existing ports and searches for
any connected DATAMAN programmer. Program PG4UW is common for some the
DATAMAN's programmers, hence PG4UW will try to find all supported programmers.
Menu File is used for source files manipulation, settings and viewing directory, changes
drives, changes start and finish address of buffer for loading and saving files and loading and
saving projects.
Menu Buffer is used for buffer manipulation, block operation, filling a part of buffer with string,
erasing, checksum and of course editing and viewing with other items (find and replace
string, printing...).
Menu Device is used for a work with selected programmable device: select, read, blank
check, program, verify, erase and setting of programming process, serialization and
associated file control.
Menu Programmer is used for work with programmer.
Menu Options is used to view and change various default settings.
Menu Help is used for view supported devices and programmers and information about
program version.
Programming a device
1. select device: click on
2. load data into buffer:
a) from file: click on
b) from device: insert device to ZIF and click on
3. insert target device to ZIF