Dataman 40Pro - Manual (Page 81)

PG4UW
81
It contains two editable fields:
Operator identification this parameter will be used to identify programmer's operator.
Operator ID must be at least 3 chars. User has to enter
Operator identification value, because it is mandatory
parameter, when creating Job Report for protected project.
Enter Job ID identification of current job.
Note: Dialog Enter job identification is not password dialog. Values of Operator identification
and Job ID have informative purpose only; they will be included in Job Report. It does not
relate to protected and/or encrypted project passwords.
File / Save project
This option is used for saving project file, which contains settings of device configuration and
buffer data saved. Data saved to project file can be restored anytime by menu command File
/ Load project.
Description of actually selected project in file list box
Displays information about existing project file currently selected in dialog Save project. This
box is only for information and is not writable.
Description of project being saved
Upper half displays information about actual program configuration including currently
selected device, program mode, date and time, etc., and is not writable. These actual
program settings are used for creation of project description header.
Bottom half is user editable and contains project description (arbitrary text) which usually
consists of project author and some notes.
Checkbox Encrypt project file (with password) is used to save project in special format
using encryption algorithm. This prevents loading project file into software without knowledge
of password. After clicking the button with key, password dialog appears, which is used to
specify encryption password for project being saved.
Checkbox Set Protected mode of software after loading of this project file is used to
save project in special mode called Protected mode. After clicking the button with key,
password dialog appears, which is used to specify Protected mode password for project
being saved, and another security options (disable other project loading, device operations
restriction) to prevent operator's mistakes. Projects saved with active Protected mode are
special projects called Protected mode projects. For more detailed information about
Protected mode projects see Options / Protected mode. When Protected mode is active,
the software indicates this by label Protected mode in right top corner of Programmer
activity log.
Recommendation: passwords for Encrypt project file (with password) and Set Protected
mode of software after loading of this project file should not be the same.
Checkbox Require project file checksum before first programming when active, software
asks user for entering correct project file unique ID, before allowing to start the first device
programming after load project. This feature is recommended for additional check, that
correct project file is recently loaded. There is also recommended to use this checkbox along
with active Protected mode. When the request of project file unique ID is active, the software