Dataman S4 - Manual

DATAMAN S4 MANUAL
Introduction to S4 1
Introduction to S4
DATAMAN S4 is a battery-powered PROM
programmer for Microsystem Designers. It can
readily be used for production programming
too.
S4 contains 128k, 256k or 512k of RAM which
retains data and configuration even when
switched off. The RAM can be downloaded
with data and manipulated either remotely from
a computer via RS232 interface or directly from
S4's keypad. S4 provides plug-in emulation for
PROMS via a 24/28/32 pin emulator lead. The
development method is that a new program
can be tried out by emulation. When it works, a
PROM can be programmed, plugged into the
system and the jobs done. Programming
facilities include EPROMS of the 27 series,
such as 2716 or 278000, also FLASH
EPROMS and most EEPROMS, including 28,
52, 55 & 98 series.