Dataman 40Pro - Manual (Page 149)

PG4UWMC
149
When Automatically save Job Report file setting is set, no Job Report dialogs appears
when generating Job Report. Newly generated Job Report is saved to file without any dialogs
or messages (if no error occurs while saving to file).
If the checkbox Automatically save Job Report file is unchecked, the PG4UWMC will show
Job Report dialog every time needed.
In the Job Report dialog user can select operation to do with Job Report. If user selects no
operation (Close button), the Job Report will be written to PG4UWMC Log Window only.
Example of typical Job Report dialog is shown bellow:
Automatic YES! Settings
I this mode you just take off the programmed device, then put new device into ZIF socket and
a last operation will be repeated automatically. Program automatically detects an insertion of
a new device and runs last executed operation without pressing any key or button. An
insertion of device into ZIF is displayed on the screen. Repeated operation executing will be
canceled by pressing key during waiting for insert/remove a device to/from ZIF.