Dataman 40Pro - Manual (Page 68)

68
New versions of programmer software
In order to exploit all the capabilities of programmer we recommend using the latest version
of PG4UW. You may download the latest version of programmer software from our website
www.dataman.com .
Copy to a temporary directory, disconnect programmer from PC and then launch it. Setup will
start with Step 2 from previous chapter.
Hardware setup
When the programmer is connected to USB port before control program was installed,
Windows will detect new hardware and ask user to select driver installation method:
automatically or manually. To detect programmer correctly, control program installation CD
must be inserted to computer's CD-ROM drive and following steps have to be done:
Step 1.
Directly connect USB (LPT) cable to type B USB (LPT) port on programmer.
Step 2.
Directly connect USB (LPT) cable to type A USB2.0 (LPT) port on PC (high-speed
recommended).
Step 3.
Connect connectors of power supply cable to appropriate connectors on programmer and
wall plug.
Step 4.
Turn on programmer. At this time all 'work result' LEDs light up successive and then LEDs
switch off.
For LPT connected programmer you may start work with your programmer now.
For USB connected programmer continue with next step.