Dataman 40Pro - Manual (Page 50)

50
Note: H/L/read DATAMAN-40PRO driver
C1
R1
H/L/read driver
in programmer
pin of ISP
connector
PU/PD driver
in programmer
R2
C1=1nF, R1=1k3, R2=22k
Selftest
If you feel that your programmer does not react according to your expectation, please run the
programmer selftest using Diagnostic POD, enclosed with the standard delivery package.
Insert 40 pins diagnostic POD - type I into ZIF socket of the programmer. 40 pins
diagnostic POD - type I must be inserted as 40 pins device.
Run selftest of programmer in PG4UW (Programmer / Selftest plus).
Technical specification
HARDWARE
Programmer
two D/A converters for VCCP and VPP, controllable rise and fall time
VCCP range 2..7V/350mA
VPP range 2..25V/200mA
USB 2.0/1.1 compatible interface
selftest capability
ZIF socket, pindriver
40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
pindriver: 40 TTL pindrivers, universal GND/VCC/VPP pindriver