CIRCUTOR CVMk2 Series - Manual (Page 93)

93
CVM k2
DISPLA
Y
6.1.4 CURRENT
Instantaneous values for the currents of each phase and the neutral are displayed on this
screen.
On this screen, the following options are shown above the function buttons:
Info : Press this button to access the system information screen (Section 6.1.1.1., System
Information).
Max : Press this button to access the screen that displays the maximum values stored.
Maximum values for each variable recorded since the last reset along with the date
and time of the registry are displayed on this screen.
On the Max screen, the INST. option appears, which can be used to return to the
screen that displays the instantaneous variables.
Min : Press this button to access the screen that displays the minimum values stored.
Minimum values for each variable recorded since the last reset along with the date
and time of the registry are displayed on this screen.
On the Min screen, the INST. option appears, which can be used to return to the
screen that displays the instantaneous variables.
scop : Pressing sCOP will access the waveform screen for the currents of the phases.
NOTE: The neutral line current is that which is measure by the CVMk2
if a neutral transformer is configured and connected. If no transformer is
connected, the system can be programmed to calculate the neutral current.