CIRCUTOR CVMk2 Series - Manual (Page 100)

100
CVM k2
DISPLA
Y
6.1.6, POWER FACTOR
Real time values for the power factor corresponding to each phase and the total power factor
are displayed on this screen.
6.1.7 COS
j
Instantaneous values for the cos j value for each phase and the total cos j are displayed on
this screen.
On this screen, the following options are shown above the function buttons:
Info : This displays the system information screen (Section 6.1.1.1., System Information).
Max : This displays the screen with the maximum values stored. The maximum values for each
variable recorded since the last reset are displayed on the screen, along with the date
and time of registry.
On the Max screen, the INST. option appears, which can be used to return to the screen
that displays the instantaneous variables.
Min : This displays the screen with the minimum values stored. The minimum values for each
variable recorded since the last reset are displayed on the screen, along with the date
and time of registry.
On the Min screen, the INST. option appears, which can be used to return to the screen
that displays the instantaneous variables.