CIRCUTOR CVMk2 Series - Manual (Page 39)

39
CVM k2
CONFIGURA
TION
To access the configuration menu for the different expansion cards, select EXP.CARDS in SETUP
MENU. Select the position of the card to be configured.
Now, screw on the top provided with the card.
Before to powering up the machine, make sure that all the cables are properly
connected. A wrong connection can cause serious injuries to the personnel
that is working on the system.
If there is no card inserted in the position selected, the NO CARD message will be displayed
on the screen.
The menu could be different depending on the expansion card inserted. In the manual will
explain all menus of all expansion cards.