CIRCUTOR CVMk2 Series - Manual (Page 78)

78
CVM k2
CONFIGURA
TION
To modify the current values, press EDIT (F4). The cursor will be positioned in the first line of
parameters. Use the up-down arrow buttons to move the cursor to the desired parameter. Press
SET to enter edit mode for the desired value.
5.1.2 CLOCK / TEMPERATURE
To configure the internal system clock, go to system in menu . In system , drop down the
preferences menu and select clock/t.
Parameters that can be modified on this screen follow:
contrast : It is possible to change the contrast of the digits displayed on the screen and to
adapt the screen to better suit the lighting in the facility. Values that can
be entered can vary from 00 to 99 .
LCD off : Choose between yes and no . If YES is selected, the screen switchs off is
activated to save energy. The screen disconnection time is automatically
configured for 5 minutes.
BACKLIGHT : Enter the time (in seconds) over which the screen backlighting should be
activated. Select on of the following: 10 , 90 or 180 . It is possible to select On or
Off. If On is selected, backlighting is always on. If Off is selected, backlighting
is always off.
Language: This indicates the system interface language to be used on screens and
menus. It is currently possible to select Spanish, English, French or
German.
To store the modified parameters in memory, press SET and confirm with OK (F4). To exit without
saving changes press ESC (F3).