CIRCUTOR CVMk2 Series User Manual

Page 82

CVM

CONFIGURA

TION

To view another measurement module, press the

sel

(F4) button and access the list of

connected modules. The cursor will be positioned over the first line, which corresponds with

the first module configured in the list.
Use the up-down arrow buttons to move the cursor to the desired module. Press

SET

to enter

the desired value.

On the screen a list will outline all measurement modules that have been configured and

entered on the screen. The list shows the following parameters.

0123456789 abcdefghij YES/NO

0123456789

: This is the serial number of the module detected by the screen.

abcdefghij

: This is the name configured for this module.

yes/no

This indicates the module selected to view in the screen.

The name of the module selected is displayed on the upper right hand side of the screen. If

another module is selected, the name will change to indicate the measurement module that

corresponds with the values currently displayed at any time.

To view the parameters of another module in the list, navigate to the module using the arrow
buttons. When the cursor is over the desired module, select it by pressing

sel

(F4) in order to

change the menu option to

yes

and then confirm with

To change the module that is viewed on the display, choose

system

from the

. In

system

access the

modules

drop down menu and select the

list

option. Then, confirm with the

set

button.