Static outputs configuration, Outputs wiring, A. outputs t. outputs – CIRCUTOR CVMk2 Series User Manual
Page 71
71
CVM
k2
CONFIGURA
TION
4.7.6.4. Static outputs configuration
The outputs of the expansion card are configurating in that screen. The transistor are called
OUT 01
,
OUT 02
,
OUT 03
and
OUT 04
.
On this screen you configure alarms equations that are applied to select the outputs of the
device. You can set up equations with functions AND (*) and / or OR (+) in one or more of the
16 pre-configured alarms (see section 4.7.6.3 Alarm configuration), to activate each of the 4
output transistor of the team.
To modify the configuration parameters of the card, you must press the
EDIT
(F4). Select the
output you want to configure and press
SET
to enter editing.
1
A. OUTPUTS
T. OUTPUTS
2 3
4
5
6 7
8 9
1
2 3
4
5
6 7
8 9
1- COMMON
2- Analogic output 1
3- COMMON
4-
Analogic output 2
5- COMMON
6-
Analogic output 3
7- COMMON
8-
Analogic output 4
9- No used
1- COMMON
2- COMMON
3-
4-
5-
6-
7-
8-
9- Transistor ouput 4
COMMON
COMMON
COMMON
Transistor ouput 1
Transistor ouput 2
Transistor ouput 3
4.7.6.5. Outputs wiring
The layout of the outputs of the expansion card is as follows