CIRCUTOR CVMk2 Series - Manual (Page 40)

40
CVM k2
CONFIGURA
TION
4.7.1. 8 DIGITAL INPUTS AND 8 DIGITAL OUTPUTS
To access the configuration of the card with 8 digital inputs and 8 digital outputs, enter the
configuration menu (
menu ---> setup. ) and in the EXP.CARD menu, select the position where the
card is inserted. To modify the card configuration parameters, press the EDIT button (F4).
The parameters configured on the alarms screen have different meanings depending on the
electric variable chosen on the configuration line,
Var. Code . (See Chapter 8.3, Modbus Memory
Map, to see the codes for all variables.)
Two types of electric variables are distinguished to configure an alarm.
- One real time value that is measured or calculated by the analyzer. (type a).
- Assigned an output for impulses (kW·h). One example of this type of variable can be
consumed active energy with code 129 (type b).
Read Section 4.7.0., Inserting
Expansion Cards.