CIRCUTOR CVMk2 Series - Manual (Page 65)

65
CVM k2
CONFIGURA
TION
4.7.5 - μSD MEMORY
Read Section 4.7.0., Inserting
Expansion Cards.
4.7.5.1. μSD Card configuration
WARNING: When an μSD card is installed in the system, it is automatically
formatted. It is recommended not to install cards with documents that should
be preserved.
The card format should be FAT 16 and the maximum capacity is 2 Gb.
Neither FAT 32 nor HCSD formats are accepted.
Once the card is inserted, continue with its configuration. To do so, select the MENU option from
the upper bar on the display and press SET to access the drop-down menu.
From the three options that appear on the drop-down menu (card 1, card 2 or card 3), count
from the top side of the system to select the position where the expansion card is inserted.
NOTE: If there is no card inserted in the position selected, the message NO CARD will
appear on screen
Confirm the selection with the SET button, and continue with the card configuration.
To access to μSD memory card configuration, enter the configuration menu ( menu ---> setup. ),
and in the EXP.CARD menu, select the position where the card is inserted.