CIRCUTOR CVMk2 Series - Manual (Page 58)

58
CVM k2
CONFIGURA
TION
1
2
JUMPER
9 1
+ -
24 Vdc
Vaux.
When the load connected to the outputs is greater than 300 Ω, the outputs can be powered
by an external power supply. In order to supply the outputs with an external power supply,
change the position of the plate jumper to position 2, as indicated in the figure. To connect
the source, connect the positive cable to terminal No. 9 and the negative cable to any of the
ground connections.
The connection of the card inputs and outputs is shown in the following figure:
An example of the wiring of the expansion cards is:
1 2 3 4 5 6 7 8 9
Sensor
4...20mA
D
A
D
A
Sensor
4...20mA
ENTRADAS / INPUTS
COMM
1 2 3 4 5 6 7 8 9
Carga externa
External load
D
A
D
A
SALIDAS / OUTPUTS