CIRCUTOR CVMk2 Series - Manual (Page 87)

87
CVM k2
DISPLA
Y
6.1.1.2. Maximums
The maximum values are displayed on the screen, along with the date and time when they
were recorded for the instantaneous variables.
The menus that appear above the function buttons on this screen are the following:
Info : (F1) Press this button to return to the system information screen (section
6.1.1.1. System Information
INST. : (F2) Press this button to return to the screen on which the variables' real time
values are displayed. (See Section 6.1.1. Main)
min : (F3) Press this button to exit the maximum values screen and to enter the
minimum values screen (See Section 6.1.1.3.).
The following variables are displayed on the maximum values screen:
v. AVG. : Maximum value for the mean of the three phase voltages.
P. Total : Maximum value of the sum of the real time power values of the three phases.
S. Total : Maximum value of the sum of the real time apparent power values of the three
phases.
pF. AVG : Maximum value for the mean of the three phase power factor.
Freq : Maximum line frequency (referenced from the maximum phase 1 frequency).
When the maximum values are displayed, the exact time and date when they were recorded
is displayed with each one of them. These maximum values are referenced to the date when
the system was connected. If the maximum values have been deleted, these values make
reference to the period since the date when the last delete was performed.