CIRCUTOR CVMk2 Series - Manual (Page 13)

13
CVM k2
INTRODUCTION
1.3 EXPANSION CARDS
1.4 CODING FOR OTHER PARAMETERS
M 5 4 X X X 0 0 X X X
Code
Internal
code
Voltage supply
(High Voltage)
85 ... 265 V a.c.
100 ... 300 V c.c
0
SDC 24...90 V c.c 8
Voltage measured
(TM)
Standard 300 / 520 V a.c 0
(1) 63,5 / 110 V a.c. (**) 1
(1) 500 / 866 V a.c. 3
Current input (1) exterior ITF (WG20) (**) 3
CODIGO I/O DESCRIPCIÓN
M54501 8I/8O
8 opto-coupled digital inputs
8 optocoupled transistor digital outputs
M54502 8I/4O
8 analogue inputs (0/4...20 mA)
4 analogue outputs (0/4...20 mA)
M54503 8I/4O
8 opto-coupled digital inputs
4 relay outputs (3 NO + 1 NO/NC)
M54504 Ethernet (Modbus/TCP) + μSD Memory
M54506 μSD Memory
M54507 4O/4O
4 analogue outputs of ± 5mA
4 opto-coupled digital outputs
M5450A Profibus DP
CVMk2 has a wide range of expansion cards that enable users to interact with the system or
tocommunicate with other protocols. The expansion cards and corresponding codes are in the
following table
For coding attributes or special features or power measuring equipment, or as modules, you
must use the following encoding table.
(**) The extent to voltage 110 Vac and / or measured using external transformers WG20
measuring transformer secondary is only possible in the measurement module 402, model code
M54412. If asked this particular module should know that the display is not included and
must be requested separately. (see paragraph 1.6 ACCESSORIES)
(1) Those devices are not under UL