Tools, 1 device – CIRCUTOR CVMk2 Series User Manual
Page 80
80
CVM
k2
CONFIGURA
TION
Password
: Enter the system password in order to make the changes (by default
1234
).
The new password should be a four digit number between
0001
and
9999
.
New
:
Enter the new system password. The password should be a four digit
number between
0001
and
9999
.
Repeat
:
Enter the password again to confirm it.
To store the modified parameters in memory, press
SET
and confirm with
OK
(F4). To exit without
saving changes press
ESC
(F3).
5.2. TOOLS
5.2.1 DEVICE
To change the configuration parameters for communication between the screen and the
connected module(s), choose the
system
option on
menu
. In
system
, access the
tools
drop
down menu and select
device.
WARNING: Changing the screen's communication speed can cause
communication to be lost with the module(s) that are not connected to the
screen at the time the change is made.
WARNING: Changing the password disables the screen, thus not blocking
access to the system configuration menus.
To modify the current values, press
EDIT
(F4). The cursor will be positioned in the first line of
parameters. Use the up-down arrow buttons to move the cursor to the desired parameter. Press
SET
to enter edit mode for the desired value.