CIRCUTOR CVMk2 Series - Manual (Page 15)

15
CVM k2
INTRODUCTION
This manual provides information and warnings that the user should heed to guarantee that the
system operates safely and is kept in good conditions for safe use.
2. INSTALLATION
Verify the following upon receiving the instrument:
• The device meets specifications in the order.
• The device was not damaged during transport.
• The instrument comes with the quick guide and/or the user's manuals.
2.1 ITEMS TO VERIFY UPON RECEPTION
In order to safely use the CVMk2, the personnel in charge of installing or
handling it must follow the standard safety guidelines and heed all warnings
provided in the instruction manual.
This analyzer should be installed and maintained by qualified personnel.
2.2 ASSEMBLY SITE
To guarantee its optimal operation, it is recommended to use the system at between -10 and
40 ºC with relative humidity between 5 and 95%, but with no condensation. Temperature range
according UL. In internal testing until 50 ºC
ENVIRONMENTAL CONDITIONS
The CVMk2 should be mounted in a distribution cabinet that protects the system from
environmental contamination such as oil, moisture, dust, corrosive vapours or other volatile
substances.
CONSIDERATIONS
The system can be installed in one of two basic ways:
• As a compact system in a distribution cabinet, installing at the panel.
• As a modular system, installing the display on the panel and the measuring
module on DIN 46277 (EN 50022) rail.
If the system is handled in a way contrary to the manufacturer's specifications, it
may not be protected.
When it is likely that the system has lost its safety guards (due to visible
damages), it should be disconnected from the auxiliary power supply and the
input supplies. In this case, contact a qualified tech support.