Altera JNEye User Manual
Page 84
• System tab
Figure 2-61: JNEye System Options Window: System Tab
• Output Directory—Specify an output directory for the simulation results according to the Output
Directory Mode setting.
• Output Directory Mode
• Sync with .jne file location—Automatically sets the output directory to the directory location
when .jne/.jneschm is created by a user with the Save or Save as command.
• As specified in the Output Directory—Sets the output directory to the location specified in the
Output Directory text box.
• Default Output Image Format—Set the default output image format to PNG, JPG, or GIF.
• Jitter Sensing Sensitivity—Select the sensitivity of jitter detection when JNEye performs jitter
analysis (Beta feature in the 15.0 release). The selections are: Default, Ideal, Low, Medium, and
High. The Default setting is equivalent to the Ideal setting.
• S-parameter Integrity Check—Use this entry to enable or disable channel integrity checking in
JNEye. The default setting is Enable. Choose Disable if JNEye has issues in opening or accessing an
S-parameter model.
2-78
System Options
UG-1146
2015.05.04
Altera Corporation
Functional Description