Altera JNEye User Manual
Page 101
Simulation Report
A simulation report is shown in the last page of the output windows. The simulation report is organized
as follows:
• Simulation Log—If link optimization is performed, the link optimization FOM (figure of merit)
transition is reported here.
• User-Defined Link Configuration—Link configuration is listed in this section which includes:
• Transmitter Reference clock configuration
• Transmitter configuration
• Receiver configuration
• Channel configuration
• Simulation Record—Report the simulation results at each test points
• Simulation Result Summary
• TX-FIR/Pre-emphasis, RX CTLE, and DFE Settings
• Eye Diagram Widths, Heights, and Margins to the eye diagram mask
---------------------------------------------------------------
JNEye Simulation Log
Tue Apr 09 22:35:29 2013
Link Optimization Mode: TX = Manual, RX = Auto
Link Optimization FOM: Area
Link Optimization: Stage=Initialization
Altera JNEye Simulation Report
Tue Apr 09 22:35:44 2013
****************** User-Defined Link Configuration *********************
Project Name: Demo_7_SVGX_AVGZ_All
Simulation Mode: Hybrid
Data Rate: 10.3125 Gbps
Simulation Length: 65536 bits
Test Pattern: PRBS-23
BER Target: 1e-012
Transmitter Reference Clock:
Frequency: 644.53 MHz
Configuration Method: Option 2
Phase Noise Profile [Freq (Hz), Amplitude (dBc)]:
[1, -52]
[10, -62]
[100, -72]
[1000, -82]
[10000, -110]
Phase Noise Fmin: 100000 Hz
Phase Noise Fmax: 6.4453e+008 Hz
Spur Profile [Freq (Hz), Amplitude (dBc)]:
[100000, -110]
[1e+006, -90]
[1e+007, -80]
Periodic Jitter:
Method: Triangle
Frequency: 0 Hz
Amplitude: 0 ps
Hershey Key: 0.05
Sharkfin Key: 0.5
Transmitter: Stratix V GX
Package: Stratix V GX
VOD: 1 V
UG-1146
2015.05.04
JNEye Data Viewer Module
2-95
Functional Description
Altera Corporation