StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 76)

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 63
The event log will store the most recent 400 events. Events are numbered sequentially from
001-999. The event number resets to 001 after 999 events have been logged.
NOTE: If there is a problem with the controller or an array, check the event log before calling
technical support. Event log messages can help resolve the problem without having
to call technical support. Refer to section "Troubleshooting" for further information.
The event information can be viewed in three (3) ways:
• Most recent event
• One event at a time (most recent event first)
• Full screen of events
The user can also capture the event log to a file (refer to section "Capturing the Event Log
File" for further information).
Viewing the Most Recent Event
The most recent voltage or temperature event will display in rotation with the date and time
(whenever the Disk Array Administrator times out and returns to its initial screen).
Viewing One Event at a Time
This function allows the user to view controller-related events one at a time. The most recent
event will be displayed first.
To view one event at a time:
1. Select Event Log Menu from the System Menu and press Enter.
The Event Log Menu should now display (Figure 42).