StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 48)

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 35
The system will now confirm your request to stop the initialization process.
4. Select Yes and press Enter.
Adding a Partition
In order to create a multiple-partition array, at least one partition on the array must be created
before the array can be used. Partitions on a multiple-partition array can be created as long
as there is free space (refer to section "Understanding Partitions" for further information).
To add a partition:
1. Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
19).
2. Select the desired multiple-partition array and press Enter.
The Array Menu should now display (Figure 20).
3. Select Add a Partition and press Enter.
The Select Free Partition screen should now display, along with a list of free partitions
(Figure 23).
A free partition is free space that has not yet been partitioned, or space that used to
have a partition (before it was deleted).
Figure 23: Select Free Partition Screen