StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 106)

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 93
6. Select the desired Initiator ID and press Enter.
StorCase does not recommend changing the factory default Initiator ID(s).
If in Active-Active mode, the Initiator ID screen will not appear.
The system will confirm the new Initiator ID.
7. Select Yes and press Enter.
8. Press Esc to return to the Configuration Menu.
Working with the Operating Modes
NOTES: Default operating mode for the Dual RAID Controller Module unit is Active-
Passive.
Default operating mode for the Single RAID Controller Module unit is Stand-
Alone Dual Port.
Default operating mode for the Single RAID Controller Module upgrade is
Stand-Alone Dual Port.
If upgrading a Single RAID Controller Module unit with the Single RAID
Controller Module upgrade (to a Dual RAID Controller Module configura-
tion), make sure to reconfigure the operating mode accordingly.
The Dual RAID Controller Module unit can operate in four different modes: Stand-Alone Single
Port, Stand-Alone Dual Port, Active-Active Single Port, and Active-Passive Dual Port.
In Active-Active configurations, two controller modules operate as a pair. If one controller fails,
the other can take over for the failed controller module.