Deleting a partition – StorCase Technology CSI-to-SCSI Single & Dual RAID User Manual
Page 74
Dual RAID Module User's Guide - Rev. A03
StorCase Technology, Inc.
Configuration
61
Deleting a Partition
This function allows the user to delete a partition.
CAUTION:
Deleting a partition also deletes all data stored in that partition! Be sure to
back up all data before deleting a partition!
NOTES:
A partition cannot be deleted while any utility (Initialize, Verify, Expand, or
Reconstruct) is running on the array. The utility must be stopped (if
allowed) or completed before the partition can be deleted.
There is also a Delete Partition option available in the Array Menu.
To delete a partition:
1.
Display the Partition Menu.
The Partition Menu should now display (Figure 37).
2.
Select Delete this Partition and press Enter.
The system will now confirm your request to delete the partition.
3.
Select Yes and press Enter.
From the Array Menu
From the All Partitions Menu
1.
Select Array Menu from the
System Menu and press Enter.
The Select Array screen should now display, along with a
list of existing arrays.
2.
Select the desired array and
press Enter.
The Array Menu screen should now display.
3.
Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4.
Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
1.
Select Partitions Menu from the
System Menu and press Enter.
The Select Partition or Free Area screen should now display,
along with a list of existing partitions and free space.
2.
Select the desired partition and
press Enter.
The Partition Menu screen should now display.
3.
Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4.
Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
IFS_80