Viewing expand status, Changing an array name – StorCase Technology CSI-to-SCSI Single & Dual RAID User Manual
Page 57
44
Configuration
StorCase Technology, Inc.
Dual RAID Module User's Guide - Rev. A03
Viewing Expand Status
This function allows the user to view the status of the expansion process while it is running.
To view expand status:
1.
Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
19).
2.
Select the array to view and press Enter.
The Array Menu should now display (Figure 20).
3.
Select Expand Function and press Enter.
The Expand Menu should now display.
4.
Select View Expand Status and press Enter.
The Expand Status screen should now display.
5.
Press Esc to return to the Expand Menu
.
Changing an Array Name
This function allows the user to change the name of an array. This does not affect the target
ID or LUN values of an array. The controller will not allow an array name to be changed while
a utility is running.
To change an array name:
1.
Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
19).
2.
Select the array to view and press Enter.
The Array Menu should now display (Figure 20).
3.
Select Change Array Name and press Enter.
The Enter New Name screen should now display.