StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 30)

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 17
Serial Port Set-Up (cont'd)
NOTES: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
Factory default is set to S.Port0.
The following lists each InfoStation serial port option and its description.
S.Port0 = InfoMon monitoring via the UI Module Serial Port (refer to the InfoMon User's
Guide for further information).
S.Port1 = RAID configuration through the Primary RAID Controller Module via the
UI Module Serial Port.
S.Port2 = RAID configuration through the Secondary RAID Controller Module via
the UI Module Serial Port.
S.Port3 = RAID configuration through the Primary RAID Controller Module via the
RAID Controller Module Serial Port.
InfoMon can also be monitored simultaneously via the UI Module Serial Port.
S.Port4 = RAID configuration through the Secondary RAID Controller Module via
the RAID Controller Module Serial Port.
InfoMon can also be monitored simultaneously via the UI Module Serial Port.