StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 47)

34 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
Use the é or ê key to scroll through the drives. These are the drives that are currently
members of the array.
4. Press Esc to return to the Array Menu.
Stopping the Array Initialization Process
This function allows the user to stop the initialization process during an array initialization.
After the process is stopped, the array is marked as offline and cannot be used. The drives
will remain array members and the array must be deleted before the drives can be used again.
To stop the initialization process:
1. Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
19).
2. Select the array to be stopped and press Enter.
The Array Menu should now display (Figure 20).
3. Select Abort Initialization and press Enter.
Figure 22: Drive Status Screen