StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 119)

106 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
If battery is disabled, the controller WILL NOT give any warnings, nor will it disable the write-
back cache. Once battery settings are changed, the controller will need to be rebooted for
any changes to take effect.
To change the battery setting:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 31).
2. Select Option Configuration and press Enter.
The Option Configuration screen should now display (Figure 32).
3. Select the Battery and press Enter.
The Battery screen will display (Figure 67)
The current setting is marked with an * next to it.
4. Select the desired option and press Enter.
Figure 67: Battery Screen