StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 115)

102 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
The Other Controller Menu is only available if the system is configured to run in Active-
Active Mode.
The Other Controller Menu should now display (Figure 63).
2. Select Unkill Other and press Enter.
The system will now confirm the change.
3. Select Yes and press Enter to make the change.
The other controller should now shut down.
4. Press Esc to return to the Other Controller Menu screen.
Changing the Sampling Rate
This function allows the user to set how often the controller samples data when updating disk
and array status screens (default setting is one second).
To change the sample rate:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 31).
2. Select New Sample Rate and press Enter.
The New Sample Rate screen should now display.
3. Enter the desired sample rate and press Enter.