StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 73)

60 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
Changing a Partition LUN
This function allows the user to change the LUN assigned to a partition, as it appears under
the controller's Target ID. The change is immediate, although the host system may need to be
rebooted for the partition to reflect the new LUN (refer to section "Understanding LUNs and
Viewing LUN Information" for further information).
NOTE: The partition LUN cannot be changed to a LUN that is already in use (the
LUN mustbe reassigned before it can be used).
To change a partition LUN:
1. Display the Partition Menu.
The Partition Menu should now display (Figure 37).
2. Select Change LUN and press Enter.
The New LUN screen should now display.
3. Enter the new LUN and press Enter.
The system will now confirm your request to change the partition LUN.
4. Select Yes and press Enter.
From the Array Menu From the All Partitions Menu
1. Select Array Menu from the
System Menu and press Enter.
The Select Array screen should now display, along with a
list of existing arrays.
2. Select the desired array and
press Enter.
The Array Menu screen should now display.
3. Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4. Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
1. Select Partitions Menu from the
System Menu and press Enter.
The Select Partition or Free Area screen should now display,
along with a list of existing partitions and free space.
2. Select the desired partition and
press Enter.
The Partition Menu screen should now display.
3. Select Partition Menu and press
Enter.
The Select Partition screen should now display along with a
list of exisiting partitions for the selected array.
4. Select the partition to be viewed
and press Enter.
The Partition Menu screen should now display.
IFS_80