StorCase Technology CSI-to-SCSI Single & Dual RAID - Manual (Page 129)

116 Configuration
StorCase Technology, Inc. Dual RAID Module User's Guide - Rev. A03
2. Press Esc to return to the System Menu.
Viewing Drive Status
This function allows the user to view the status of the drives in an array, including:
• Drive number (the drive's sequential position in the controller's drive list)
• Drive status (whether the drive is up or down)
• Channel number (back-end disk bus number)
• Target ID
• Size (size of the drive in MB)
• Status - If a member of an array, this will display the array name and member
number.
If a spare, this will display the type of spare.
If unused, this will display AVAILABLE.
If the drive was part of an array that no longer exists, this will display
LEFTOVER.
NOTE: If a drive has failed or malfunctioned, it may not be listed.
Figure 73: Display Drives Screen